dmesg - Radeon R9 290
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 4.3.0-powerplay2 (phoronix@phoronix-To-be-filled-by-O-E-M) (gcc version 5.2.1 20151010 (Ubuntu 5.2.1-22ubuntu2) ) #3 SMP Thu Nov 12 12:40:37 EST 2015
KERNEL supported cpus:
Intel GenuineIntel
AMD AuthenticAMD
Centaur CentaurHauls
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Supporting XSAVE feature 0x01: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x02: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x04: 'AVX registers'
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
x86/fpu: Using 'eager' FPU context switches.
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x0000000074d71fff] usable
BIOS-e820: [mem 0x0000000074d72000-0x00000000758e9fff] reserved
BIOS-e820: [mem 0x00000000758ea000-0x0000000075ba8fff] usable
BIOS-e820: [mem 0x0000000075ba9000-0x0000000076741fff] ACPI NVS
BIOS-e820: [mem 0x0000000076742000-0x0000000076fa5fff] reserved
BIOS-e820: [mem 0x0000000076fa6000-0x0000000076ffcfff] type 20
BIOS-e820: [mem 0x0000000076ffd000-0x0000000076ffdfff] usable
BIOS-e820: [mem 0x0000000076ffe000-0x0000000077083fff] reserved
BIOS-e820: [mem 0x0000000077084000-0x0000000077297fff] usable
BIOS-e820: [mem 0x0000000077298000-0x0000000077ff8fff] reserved
BIOS-e820: [mem 0x0000000077ff9000-0x0000000077ffffff] usable
BIOS-e820: [mem 0x0000000080000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000047fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.31 by American Megatrends
efi: ACPI=0x763b9000 ACPI 2.0=0x763b9000 SMBIOS=0xf0570 MPS=0xfd600
SMBIOS 2.8 present.
DMI: Gigabyte Technology Co., Ltd. To be filled by O.E.M./X99-UD4-CF, BIOS F13a 04/29/2015
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x480000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-E5FFF write-through
E6000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000080000000 mask 3FFF80000000 uncachable
1 base 380000000000 mask 3FC000000000 uncachable
2 base 00007F000000 mask 3FFFFF000000 uncachable
3 base 0000E0000000 mask 3FFFF0000000 write-through
4 base 0000F0000000 mask 3FFFFF800000 write-through
5 disabled
6 disabled
7 disabled
8 disabled
9 disabled
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WC UC- WT
e820: last_pfn = 0x78000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fd890-0x000fd89f] mapped at [ffff8800000fd890]
Scanning 1 areas for low memory corruption
Base memory trampoline at [ffff880000098000] 98000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
[mem 0x00000000-0x000fffff] page 4k
BRK [0x02ff3000, 0x02ff3fff] PGTABLE
BRK [0x02ff4000, 0x02ff4fff] PGTABLE
BRK [0x02ff5000, 0x02ff5fff] PGTABLE
init_memory_mapping: [mem 0x47fe00000-0x47fffffff]
[mem 0x47fe00000-0x47fffffff] page 1G
init_memory_mapping: [mem 0x460000000-0x47fdfffff]
[mem 0x460000000-0x47fdfffff] page 1G
init_memory_mapping: [mem 0x00100000-0x74d71fff]
[mem 0x00100000-0x001fffff] page 4k
[mem 0x00200000-0x74bfffff] page 2M
[mem 0x74c00000-0x74d71fff] page 4k
init_memory_mapping: [mem 0x758ea000-0x75ba8fff]
[mem 0x758ea000-0x75ba8fff] page 4k
BRK [0x02ff6000, 0x02ff6fff] PGTABLE
BRK [0x02ff7000, 0x02ff7fff] PGTABLE
init_memory_mapping: [mem 0x76ffd000-0x76ffdfff]
[mem 0x76ffd000-0x76ffdfff] page 4k
BRK [0x02ff8000, 0x02ff8fff] PGTABLE
init_memory_mapping: [mem 0x77084000-0x77297fff]
[mem 0x77084000-0x77297fff] page 4k
init_memory_mapping: [mem 0x77ff9000-0x77ffffff]
[mem 0x77ff9000-0x77ffffff] page 4k
init_memory_mapping: [mem 0x100000000-0x45fffffff]
[mem 0x100000000-0x45fffffff] page 1G
RAMDISK: [mem 0x33fee000-0x35feefff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000763B9000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000763B9090 0000A4 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 0x00000000763E7D10 00010C (v05 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 0x00000000763B91D0 02EB3E (v02 ALASKA A M I 01072009 INTL 20091013)
ACPI: FACS 0x000000007673EF80 000040
ACPI: APIC 0x00000000763E7E20 00012C (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: FPDT 0x00000000763E7F50 000044 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FIDT 0x00000000763E7F98 00009C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 0x00000000763E8038 00003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: UEFI 0x00000000763E8078 000042 (v01 ALASKA A M I 01072009 00000000)
ACPI: BDAT 0x00000000763E80C0 000030 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: HPET 0x00000000763E80F0 000038 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: MSCT 0x00000000763E8128 000090 (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: PMCT 0x00000000763E81B8 000064 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SLIT 0x00000000763E8220 00002D (v01 ALASKA A M I 00000001 INTL 20091013)
ACPI: SRAT 0x00000000763E8250 000E58 (v03 ALASKA A M I 00000001 INTL 20091013)
ACPI: WDDT 0x00000000763E90A8 000040 (v01 ALASKA A M I 00000000 INTL 20091013)
ACPI: SSDT 0x00000000763E90E8 009BF9 (v01 ALASKA PmMgt 00000001 INTL 20120913)
ACPI: BGRT 0x00000000763F2CE8 000038 (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: ASF! 0x00000000763F2D20 0000A0 (v32 INTEL HCG 00000001 TFSM 000F4240)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x0c -> Node 0
SRAT: PXM 0 -> APIC 0x0e -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: PXM 0 -> APIC 0x0d -> Node 0
SRAT: PXM 0 -> APIC 0x0f -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x47fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x47fffffff] -> [mem 0x00000000-0x47fffffff]
NODE_DATA(0) allocated [mem 0x47fff6000-0x47fff9fff]
[ffffea0000000000-ffffea0011ffffff] PMD -> [ffff88046f800000-ffff88047f5fffff] on node 0
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000047fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x000000000009ffff]
node 0: [mem 0x0000000000100000-0x0000000074d71fff]
node 0: [mem 0x00000000758ea000-0x0000000075ba8fff]
node 0: [mem 0x0000000076ffd000-0x0000000076ffdfff]
node 0: [mem 0x0000000077084000-0x0000000077297fff]
node 0: [mem 0x0000000077ff9000-0x0000000077ffffff]
node 0: [mem 0x0000000100000000-0x000000047fffffff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000047fffffff]
On node 0 totalpages: 4149740
DMA zone: 64 pages used for memmap
DMA zone: 25 pages reserved
DMA zone: 3999 pages, LIFO batch:0
DMA32 zone: 7434 pages used for memmap
DMA32 zone: 475725 pages, LIFO batch:31
Normal zone: 57344 pages used for memmap
Normal zone: 3670016 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0c] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0e] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0d] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0f] high edge lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 16 CPUs, 0 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x74d72000-0x758e9fff]
PM: Registered nosave memory: [mem 0x75ba9000-0x76741fff]
PM: Registered nosave memory: [mem 0x76742000-0x76fa5fff]
PM: Registered nosave memory: [mem 0x76fa6000-0x76ffcfff]
PM: Registered nosave memory: [mem 0x76ffe000-0x77083fff]
PM: Registered nosave memory: [mem 0x77298000-0x77ff8fff]
PM: Registered nosave memory: [mem 0x78000000-0x7fffffff]
PM: Registered nosave memory: [mem 0x80000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
PM: Registered nosave memory: [mem 0xfed20000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
setup_percpu: NR_CPUS:256 nr_cpumask_bits:256 nr_cpu_ids:16 nr_node_ids:1
PERCPU: Embedded 33 pages/cpu @ffff88046f400000 s97496 r8192 d29480 u262144
pcpu-alloc: s97496 r8192 d29480 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 10 11 12 13 14 15
Built 1 zonelists in Node order, mobility grouping on. Total pages: 4084873
Policy zone: Normal
PID hash table entries: 4096 (order: 3, 32768 bytes)
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 16110940K/16598960K available (7967K kernel code, 1257K rwdata, 3908K rodata, 1452K init, 1292K bss, 488020K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
Hierarchical RCU implementation.
Build-time adjustment of leaf fanout to 64.
RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=16.
RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=16
NR_IRQS:16640 nr_irqs:552 16
Console: colour dummy device 80x25
console [tty0] enabled
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2999.857 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 5999.71 BogoMIPS (lpj=11999428)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20150930
ACPI: 2 ACPI AML tables successfully acquired and loaded
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
Initializing cgroup subsys io
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
Initializing cgroup subsys hugetlb
Initializing cgroup subsys pids
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
Freeing SMP alternatives memory: 28K (ffffffff81ea7000 - ffffffff81eae000)
ftrace: allocating 31332 entries in 123 pages
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
TSC deadline timer enabled
smpboot: CPU0: Intel(R) Core(TM) i7-5960X CPU @ 3.00GHz (family: 0x6, model: 0x3f, stepping: 0x2)
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 0000ffffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
x86: Booting SMP configuration:
.... node #0, CPUs: #1
TSC synchronization [CPU#0 -> CPU#1]:
Measured 4468259641 cycles TSC warp between CPUs, turning off TSC clock.
tsc: Marking TSC unstable due to check_tsc_sync_source failed
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
#2 #3 #4 #5 #6 #7 #8 #9 #10 #11 #12 #13 #14 #15
x86: Booted up 1 node, 16 CPUs
smpboot: Total of 16 processors activated (95995.42 BogoMIPS)
devtmpfs: initialized
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0x75ba9000-0x76741fff] (12161024 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
pinctrl core: initialized pinctrl subsystem
RTC time: 13:27:29, date: 11/13/15
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
PCCT header not found.
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
perf_event_intel: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150930/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150930/hwxface-580)
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A03:03: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A03:03: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0c.6: [8086:2fe6] type 00 class 0x088000
pci 0000:ff:0c.7: [8086:2fe7] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.3: [Firmware Bug]: reg 0x10: invalid BAR (can't size)
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug]
acpi PNP0A08:00: _OSC: OS now controls [PME AER PCIeCapability]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03df window]
pci_bus 0000:00: root bus resource [io 0x1000-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:00: root bus resource [bus 00-fe]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:02.0: [8086:2f04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfbf20000-0xfbf2ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfbf3c000-0xfbf3c00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: [8086:15a1] type 00 class 0x020000
pci 0000:00:19.0: reg 0x10: [mem 0xfbf00000-0xfbf1ffff]
pci 0000:00:19.0: reg 0x14: [mem 0xfbf39000-0xfbf39fff]
pci 0000:00:19.0: reg 0x18: [io 0xf020-0xf03f]
pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
pci 0000:00:19.0: System wakeup disabled by ACPI
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfbf38000-0xfbf383ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1b.0: [8086:8d20] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfbf30000-0xfbf33fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfbf37000-0xfbf373ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d47] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0xf070-0xf077]
pci 0000:00:1f.2: reg 0x14: [io 0xf060-0xf063]
pci 0000:00:1f.2: reg 0x18: [io 0xf050-0xf057]
pci 0000:00:1f.2: reg 0x1c: [io 0xf040-0xf043]
pci 0000:00:1f.2: reg 0x20: [io 0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfbf36000-0xfbf367ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfbf35000-0xfbf350ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io 0x0580-0x059f]
pci 0000:00:1f.6: [8086:8d24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfbf34000-0xfbf34fff 64bit]
acpiphp: Slot [2] registered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [1002:67b1] type 00 class 0x030000
pci 0000:03:00.0: reg 0x10: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xf0000000-0xf07fffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [io 0xe000-0xe0ff]
pci 0000:03:00.0: reg 0x24: [mem 0xfbe00000-0xfbe3ffff]
pci 0000:03:00.0: reg 0x30: [mem 0xfbe40000-0xfbe5ffff pref]
pci 0000:03:00.0: supports D1 D2
pci 0000:03:00.0: PME# supported from D1 D2 D3hot
pci 0000:03:00.1: [1002:aac8] type 00 class 0x040300
pci 0000:03:00.1: reg 0x10: [mem 0xfbe60000-0xfbe63fff 64bit]
pci 0000:03:00.1: supports D1 D2
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 2 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:03:00.0
vgaarb: device added: PCI:0000:03:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:03:00.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x74d72000-0x77ffffff]
e820: reserve RAM buffer [mem 0x75ba9000-0x77ffffff]
e820: reserve RAM buffer [mem 0x76ffe000-0x77ffffff]
e820: reserve RAM buffer [mem 0x77298000-0x77ffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io 0x0500-0x057f] has been reserved
system 00:01: [io 0x0400-0x047f] could not be reserved
system 00:01: [io 0x0580-0x059f] has been reserved
system 00:01: [io 0x0600-0x061f] has been reserved
system 00:01: [io 0x0880-0x0883] has been reserved
system 00:01: [io 0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] could not be reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: [io 0x0a00-0x0a2f] has been reserved
system 00:02: [io 0x0a30-0x0a3f] has been reserved
system 00:02: [io 0x0a40-0x0a4f] has been reserved
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp: PnP ACPI: found 3 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:02.0: PCI bridge to [bus 02]
pci 0000:00:03.0: PCI bridge to [bus 03]
pci 0000:00:03.0: bridge window [io 0xe000-0xefff]
pci 0000:00:03.0: bridge window [mem 0xfbe00000-0xfbefffff]
pci 0000:00:03.0: bridge window [mem 0xe0000000-0xf07fffff 64bit pref]
pci_bus 0000:00: resource 4 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 5 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 6 [io 0x03b0-0x03df window]
pci_bus 0000:00: resource 7 [io 0x1000-0xffff window]
pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 9 [mem 0x90000000-0xfbffbfff window]
pci_bus 0000:03: resource 0 [io 0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
pci_bus 0000:03: resource 2 [mem 0xe0000000-0xf07fffff 64bit pref]
NET: Registered protocol family 2
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
UDP hash table entries: 8192 (order: 6, 262144 bytes)
UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
NET: Registered protocol family 1
pci 0000:03:00.0: Video device with shadowed ROM
PCI: CLS 32 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 32772K (ffff880033fee000 - ffff880035fef000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x6a2c0000-0x6e2c0000] (64MB) mapped at [ffff88006a2c0000-ffff88006e2bffff]
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2b3dbe7b003, max_idle_ns: 440795348925 ns
RAPL PMU detected, API unit is 2^-32 Joules, 3 fixed counters 655360 ms ovfl timer
hw unit of domain pp0-core 2^-14 Joules
hw unit of domain package 2^-14 Joules
hw unit of domain dram 2^-16 Joules
Intel CQM monitoring enabled
Scanning for low memory corruption every 60 seconds
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1447421253.808:1): initialized
Initialise system trusted keyring
HugeTLB registered 1 GB page size, pre-allocated 0 pages
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
fuse init (API version 7.23)
Key type big_key registered
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
io scheduler noop registered
io scheduler deadline registered (default)
io scheduler cfq registered
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:02.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:02.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
efifb: probing for efifb
pmd_set_huge: Cannot satisfy [mem 0xe0000000-0xe0200000] with a huge-page mapping due to MTRR override.
efifb: framebuffer at 0xe0000000, mapped to 0xffffc90002000000, using 3072k, total 3072k
efifb: mode is 1024x768x32, linelength=4096, pages=1
efifb: scrolling: redraw
efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
Console: switching to colour frame buffer device 128x48
fb0: EFI VGA frame buffer device
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
GHES: HEST is not enabled!
Linux agpgart interface v0.103
brd: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 32 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfbf38000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.3.0-powerplay2 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 32 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfbf37000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 4.3.0-powerplay2 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00009810
xhci_hcd 0000:00:14.0: cache line size of 32 is not supported
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 4.3.0-powerplay2 xhci-hcd
usb usb3: SerialNumber: 0000:00:14.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 15 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 4.3.0-powerplay2 xhci-hcd
usb usb4: SerialNumber: 0000:00:14.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.34.0-ioctl (2015-10-28) initialised: [email protected]
Intel P-state driver initializing.
ledtrig-cpu: registered to indicate activity on CPUs
EFI Variables Facility v0.08 2004-May-17
NET: Registered protocol family 10
NET: Registered protocol family 17
Key type dns_resolver registered
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 459a05f363e3166c10b1fc9aadc3371f1145bd63'
zswap: loaded using pool lzo/zbud
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass!
evm: HMAC attrs: 0x1
Magic number: 7:312:483
rtc_cmos 00:00: setting system clock to 2015-11-13 13:27:34 UTC (1447421254)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1452K (ffffffff81d3c000 - ffffffff81ea7000)
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 212K (ffff8800027cb000 - ffff880002800000)
Freeing unused kernel memory: 188K (ffff880002bd1000 - ffff880002c00000)
random: systemd-udevd urandom read with 2 bits of entropy available
wmi: Mapper loaded
FUJITSU Extended Socket Network Device Driver - version 1.0 - Copyright (c) 2015 FUJITSU LIMITED
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x4 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
[drm] Initialized drm 1.1.0 20060810
scsi host4: ahci
scsi host5: ahci
ata1: DUMMY
ata2: DUMMY
ata3: SATA max UDMA/133 abar m2048@0xfbf36000 port 0xfbf36200 irq 27
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[drm] radeon kernel modesetting enabled.
AMD IOMMUv2 driver by Joerg Roedel
AMD IOMMUv2 functionality not available on this system
CRAT table not found
Finished initializing topology ret=0
kfd kfd: Initialized module
checking generic (e0000000 300000) vs hw (e0000000 10000000)
fb: switching to radeondrmfb from EFI VGA
Console: switching to colour dummy device 80x25
[drm] initializing kernel modesetting (HAWAII 0x1002:0x67B1 0x1682:0x9295).
[drm] register mmio base: 0xFBE00000
[drm] register mmio size: 262144
[drm] doorbell mmio base: 0xF0000000
[drm] doorbell mmio size: 8388608
ATOM BIOS: C67111
radeon 0000:03:00.0: VRAM: 4096M 0x0000000000000000 - 0x00000000FFFFFFFF (4096M used)
radeon 0000:03:00.0: GTT: 2048M 0x0000000100000000 - 0x000000017FFFFFFF
[drm] Detected VRAM RAM=4096M, BAR=256M
[drm] RAM width 512bits DDR
[TTM] Zone kernel: Available graphics memory: 8127920 kiB
[TTM] Zone dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
[drm] radeon: 4096M of VRAM memory ready
[drm] radeon: 2048M of GTT memory ready.
[drm] Loading hawaii Microcode
[drm] Internal thermal controller with fan control
[drm] probing gen 2 caps for device 8086:2f08 = 77a3903/e
[drm] radeon: dpm initialized
[drm] Found VCE firmware/feedback version 40.2.2 / 15!
[drm] GART: num cpu pages 524288, num gpu pages 524288
[drm] probing gen 2 caps for device 8086:2f08 = 77a3903/e
[drm] PCIE gen 3 link speeds already enabled
[drm] PCIE GART of 2048M enabled (table at 0x0000000000324000).
radeon 0000:03:00.0: WB enabled
radeon 0000:03:00.0: fence driver on ring 0 use gpu addr 0x0000000100000c00 and cpu addr 0xffff880035ae6c00
radeon 0000:03:00.0: fence driver on ring 1 use gpu addr 0x0000000100000c04 and cpu addr 0xffff880035ae6c04
radeon 0000:03:00.0: fence driver on ring 2 use gpu addr 0x0000000100000c08 and cpu addr 0xffff880035ae6c08
radeon 0000:03:00.0: fence driver on ring 3 use gpu addr 0x0000000100000c0c and cpu addr 0xffff880035ae6c0c
radeon 0000:03:00.0: fence driver on ring 4 use gpu addr 0x0000000100000c10 and cpu addr 0xffff880035ae6c10
radeon 0000:03:00.0: fence driver on ring 5 use gpu addr 0x0000000000076c98 and cpu addr 0xffffc90002436c98
radeon 0000:03:00.0: fence driver on ring 6 use gpu addr 0x0000000100000c18 and cpu addr 0xffff880035ae6c18
radeon 0000:03:00.0: fence driver on ring 7 use gpu addr 0x0000000100000c1c and cpu addr 0xffff880035ae6c1c
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
radeon 0000:03:00.0: radeon: using MSI.
[drm] radeon: irq initialized.
[drm] ring test on 0 succeeded in 4 usecs
[drm] ring test on 1 succeeded in 3 usecs
[drm] ring test on 2 succeeded in 3 usecs
[drm] ring test on 3 succeeded in 5 usecs
[drm] ring test on 4 succeeded in 4 usecs
[drm] ring test on 5 succeeded in 2 usecs
[drm] UVD initialized successfully.
e1000e 0000:00:19.0 eth0: registered PHC clock
e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) fc:aa:14:29:ab:0d
e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0 eth0: MAC: 11, PHY: 12, PBA No: FFFFFF-0FF
e1000e 0000:00:19.0 eno1: renamed from eth0
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 3-9: new high-speed USB device number 2 using xhci_hcd
usb 2-1: new high-speed USB device number 2 using ehci-pci
usb 4-5: new SuperSpeed USB device number 2 using xhci_hcd
[drm] ring test on 6 succeeded in 24 usecs
[drm] ring test on 7 succeeded in 3 usecs
[drm] VCE initialized successfully.
usb 4-5: New USB device found, idVendor=045b, idProduct=0210
usb 4-5: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 4-5:1.0: USB hub found
hub 4-5:1.0: 4 ports detected
[drm] ib test on ring 0 succeeded in 0 usecs
ata3: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
usb 1-1: New USB device found, idVendor=8087, idProduct=800a
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=8002
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
ata3.00: ATA-9: OCZ-VERTEX3, 2.06, max UDMA/133
ata3.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access ATA OCZ-VERTEX3 n/a PQ: 0 ANSI: 5
sd 2:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/223 GiB)
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
[drm] ib test on ring 1 succeeded in 0 usecs
[drm] ib test on ring 2 succeeded in 0 usecs
[drm] ib test on ring 3 succeeded in 0 usecs
[drm] ib test on ring 4 succeeded in 0 usecs
[drm] ib test on ring 5 succeeded
[drm] ib test on ring 6 succeeded
[drm] ib test on ring 7 succeeded
[drm] Radeon Display Connectors
[drm] Connector 0:
[drm] DP-1
[drm] HPD2
[drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
[drm] Encoders:
[drm] DFP1: INTERNAL_UNIPHY2
[drm] Connector 1:
[drm] HDMI-A-1
[drm] HPD3
[drm] DDC: 0x6550 0x6550 0x6554 0x6554 0x6558 0x6558 0x655c 0x655c
[drm] Encoders:
[drm] DFP2: INTERNAL_UNIPHY2
[drm] Connector 2:
[drm] DVI-D-1
[drm] HPD1
[drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c
[drm] Encoders:
[drm] DFP3: INTERNAL_UNIPHY1
[drm] Connector 3:
[drm] DVI-D-2
[drm] HPD6
[drm] DDC: 0x6580 0x6580 0x6584 0x6584 0x6588 0x6588 0x658c 0x658c
[drm] Encoders:
[drm] DFP4: INTERNAL_UNIPHY
[drm] fb mappable at 0xE0727000
[drm] vram apper at 0xE0000000
[drm] size 14745600
[drm] fb depth is 24
[drm] pitch is 10240
fbcon: radeondrmfb (fb0) is primary device
Console: switching to colour frame buffer device 320x90
radeon 0000:03:00.0: fb0: radeondrmfb frame buffer device
[drm] Initialized radeon 2.43.0 20080528 for 0000:03:00.0 on minor 0
[drm] amdgpu kernel modesetting enabled.
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
systemd[1]: Failed to insert module 'kdbus': Function not implemented
systemd[1]: systemd 225 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
systemd[1]: Detected architecture x86-64.
systemd[1]: Set hostname to .
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Created slice Root Slice.
systemd[1]: Listening on fsck to fsckd communication Socket.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Listening on Journal Audit Socket.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Created slice System Slice.
systemd[1]: Starting Increase datagram queue length...
systemd[1]: Created slice system-getty.slice.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Starting Setup Virtual Console...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting Debug File System...
systemd[1]: Starting Create list of required static device nodes for the current kernel...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: Started Braille Device Support.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Reached target Slices.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting Uncomplicated firewall...
systemd[1]: Reached target Remote File Systems (Pre).
systemd[1]: Created slice system-systemd\x2dfsck.slice.
systemd[1]: Started Read required files in advance.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting udev Coldplug all Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted Debug File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Started Increase datagram queue length.
systemd[1]: Started Setup Virtual Console.
systemd[1]: Started Create list of required static device nodes for the current kernel.
systemd[1]: Started Uncomplicated firewall.
lp: driver loaded but no devices found
ppdev: user-space parallel port driver
systemd[1]: Started Load Kernel Modules.
systemd[1]: ureadahead.service: Main process exited, code=exited, status=5/NOTINSTALLED
systemd[1]: ureadahead.service: Unit entered failed state.
systemd[1]: ureadahead.service: Failed with result 'exit-code'.
systemd[1]: Starting Apply Kernel Variables...
systemd[1]: Mounting FUSE Control File System...
systemd[1]: Starting Create Static Device Nodes in /dev...
systemd[1]: Listening on Syslog Socket.
systemd[1]: Starting Journal Service...
systemd[1]: Mounted FUSE Control File System.
systemd[1]: Started Apply Kernel Variables.
systemd[1]: Started Create Static Device Nodes in /dev.
systemd[1]: Starting udev Kernel Device Manager...
systemd[1]: Started udev Coldplug all Devices.
systemd[1]: Started udev Kernel Device Manager.
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Show Plymouth Boot Screen...
systemd[1]: Started Journal Service.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
systemd-journald[365]: Received request to flush runtime journal from PID 1
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
EDAC MC: Ver: 3.0.0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2fa0
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffc
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2ffd
EDAC sbridge: Seeking for: PCI ID 8086:2f60
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2fa8
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2f71
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2faa
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fab
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fac
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fad
EDAC sbridge: Seeking for: PCI ID 8086:2fbd
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fbf
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fb9
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2fbb
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f68
EDAC sbridge: Seeking for: PCI ID 8086:2f79
EDAC sbridge: Seeking for: PCI ID 8086:2f6a
EDAC sbridge: Seeking for: PCI ID 8086:2f6b
EDAC sbridge: Seeking for: PCI ID 8086:2f6c
EDAC sbridge: Seeking for: PCI ID 8086:2f6d
EDAC sbridge: ECC is disabled. Aborting
EDAC sbridge: Couldn't find mci handler
AVX2 version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
snd_hda_intel 0000:00:1b.0: enabling device (0000 -> 0002)
snd_hda_intel 0000:03:00.1: Handle vga_switcheroo audio client
snd_hda_intel 0000:03:00.1: Force to non-snoop mode
input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input5
input: HDA ATI HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input6
input: HDA ATI HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input7
input: HDA ATI HDMI HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input8
input: HDA ATI HDMI HDMI/DP,pcm=10 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input9
input: HDA ATI HDMI HDMI/DP,pcm=11 as /devices/pci0000:00/0000:00:03.0/0000:03:00.1/sound/card1/input10
intel_rapl: Found RAPL domain package
snd_hda_codec_realtek hdaudioC0D2: ALC1150: SKU not ready 0x00000000
snd_hda_codec_realtek hdaudioC0D2: autoconfig for ALC1150: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
snd_hda_codec_realtek hdaudioC0D2: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
snd_hda_codec_realtek hdaudioC0D2: mono: mono_out=0x0
snd_hda_codec_realtek hdaudioC0D2: dig-out=0x11/0x1e
snd_hda_codec_realtek hdaudioC0D2: inputs:
snd_hda_codec_realtek hdaudioC0D2: Front Mic=0x19
snd_hda_codec_realtek hdaudioC0D2: Rear Mic=0x18
snd_hda_codec_realtek hdaudioC0D2: Line=0x1a
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input15
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
Adding 16598012k swap on /dev/sda3. Priority:-1 extents:1 across:16598012k SSFS
audit: type=1400 audit(1447421257.348:2): apparmor="STATUS" operation="profile_load" name="/usr/lib/lightdm/lightdm-guest-session" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1447421257.348:3): apparmor="STATUS" operation="profile_load" name="chromium" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1447421257.352:4): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1447421257.352:5): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1447421257.352:6): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1447421257.352:7): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1447421257.360:8): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1447421257.360:9): apparmor="STATUS" operation="profile_load" name="sanitized_helper" pid=614 comm="apparmor_parser"
audit: type=1400 audit(1447421257.360:10): apparmor="STATUS" operation="profile_load" name="/usr/bin/evince-previewer" pid=614 comm="apparmor_parser"
cgroup: new mount options do not match the existing superblock, will be ignored
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
IPv6: ADDRCONF(NETDEV_UP): eno1: link is not ready
random: nonblocking pool is initialized
e1000e: eno1 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
IPv6: ADDRCONF(NETDEV_CHANGE): eno1: link becomes ready
usb 3-9: device descriptor read/all, error -110
usb 3-9: new high-speed USB device number 3 using xhci_hcd
usb 3-9: New USB device found, idVendor=045b, idProduct=0209
usb 3-9: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 3-9:1.0: USB hub found
hub 3-9:1.0: 4 ports detected
usb 3-9.4: new high-speed USB device number 4 using xhci_hcd
usb 3-9.4: New USB device found, idVendor=05e3, idProduct=0608
usb 3-9.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0
usb 3-9.4: Product: USB2.0 Hub
hub 3-9.4:1.0: USB hub found
hub 3-9.4:1.0: 4 ports detected
usb 3-9.4.3: new low-speed USB device number 5 using xhci_hcd
usb 3-9.4.3: New USB device found, idVendor=04f2, idProduct=0833
usb 3-9.4.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9.4.3: Product: USB Keyboard
usb 3-9.4.3: Manufacturer: CHICONY
usb 3-9.4.3: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.4.3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
usb 3-9.4.4: new full-speed USB device number 6 using xhci_hcd
usb 3-9.4.4: New USB device found, idVendor=1532, idProduct=0101
usb 3-9.4.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-9.4.4: Product: Razer Copperhead Laser Mouse
usb 3-9.4.4: Manufacturer: Razer
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.3/3-9.4.3:1.0/0003:04F2:0833.0001/input/input18
hid-generic 0003:04F2:0833.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-0000:00:14.0-9.4.3/input0
input: CHICONY USB Keyboard as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.3/3-9.4.3:1.1/0003:04F2:0833.0002/input/input19
hid-generic 0003:04F2:0833.0002: input,hiddev0,hidraw1: USB HID v1.11 Device [CHICONY USB Keyboard] on usb-0000:00:14.0-9.4.3/input1
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4:1.0/0003:1532:0101.0003/input/input20
hid-generic 0003:1532:0101.0003: input,hidraw2: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-9.4.4/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-9/3-9.4/3-9.4.4/3-9.4.4:1.1/0003:1532:0101.0004/input/input21
hid-generic 0003:1532:0101.0004: input,hidraw3: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-9.4.4/input1
deprecated_sysctl_warning: 42 callbacks suppressed
warning: process `metro' used the deprecated sysctl system call with 10.1.
perf interrupt took too long (2503 > 2500), lowering kernel.perf_event_max_sample_rate to 50000